Use our Rubik’s Cube solver below to enter the colors on each side of your 3×3 cube and get the exact moves needed to solve it. If your cube is mixed up and you do not know what to do next, this tool can help you figure out the next steps.
Position your cube into this setup before choosing the right configuration.
Rubik’s Cube Solver by Color
Rubik’s Cube Solver by Color
Choose a color, then click each sticker on your 3×3 cube. Enter the faces in this order: Up, Right, Front, Down, Left, Back. The center sticker on each face should match that face’s real center color on your cube.
Fill in all stickers, then click the solve button.
Move Notation
U = top, D = bottom, L = left, R = right, F = front, B = back.
‘ means turn counterclockwise. 2 means turn that face twice.
How to Use This Rubik’s Cube Solver by Color
- All turns are based on looking directly at that face.
- If you see R, that means you turn the right face towards you and turn that face clockwise.
- Pay attention to how you turn the cube when you make a move and turn it back to the original position before making another move. (White = U, Red = R, Green = F, etc.)
Rubik’s Cube Move Notation (Simple Guide)
Basic Moves (Clockwise Turns)
Each letter means turning that face clockwise (to the right):
- U = Turn the top (Up) face clockwise
- D = Turn the bottom (Down) face clockwise
- L = Turn the left face clockwise
- R = Turn the right face clockwise
- F = Turn the front face clockwise
- B = Turn the back face clockwise
Clockwise means turning the face to the right, like turning a screw.
Counterclockwise Moves (’)
If you see an apostrophe (’), turn the face the opposite direction (left):
- U’ = Top face counterclockwise
- D’ = Bottom face counterclockwise
- L’ = Left face counterclockwise
- R’ = Right face counterclockwise
- F’ = Front face counterclockwise
- B’ = Back face counterclockwise
Think: apostrophe = reverse direction
Double Turns (2)
If you see a 2, turn that face twice (180°):
- U2 = Turn top face twice
- D2 = Turn bottom face twice
- L2 = Turn left face twice
- R2 = Turn right face twice
- F2 = Turn front face twice
- B2 = Turn back face twice
A “2” always means a full half-turn (same result either direction).
Quick Summary
- No symbol → turn clockwise
- ’ → turn counterclockwise
- 2 → turn twice (180°)
If your cube is scrambled and you do not know what move to make next, this Rubik’s Cube solver by color can help. Instead of guessing, you can enter the colors on each side of your 3×3 cube and get the exact moves needed to solve it.
To use the solver, click the stickers and match them to the colors on your real cube. Each side of a standard 3×3 Rubik’s Cube has 9 stickers, and the center sticker tells you what color that face is supposed to be. Once all six sides are entered correctly, click the solve button to generate the move sequence.
This tool is useful for beginners, casual cube users, and anyone who mixed up a cube and wants a faster way to solve it without memorizing advanced methods.
Enter the Cube Colors in the Correct Order
To get an accurate solution, you need to enter the sides in the correct order:
Up, Right, Front, Down, Left, Back
This matters because the solver reads the cube in a specific format. If the sides are entered in the wrong order, the solution may be incorrect or the tool may say the cube state is invalid.
A good way to avoid mistakes is to hold the cube the same way during the entire process and fill in one face at a time. Double-check that the center sticker color on each side matches the main color for that face.
Why the Center Stickers Matter
The center pieces do not move relative to each other on a standard 3×3 Rubik’s Cube. That means the center sticker on each face tells you which side is which.
For example, if the center sticker on one face is white, that face should be entered as the white side. The same idea applies to red, blue, green, yellow, and orange. If the center colors are entered incorrectly, the solver may not be able to produce a valid solution.
Why the Tool Says Your Cube Is Invalid
If the solver says your Rubik’s Cube is invalid, there is usually a simple reason. The most common problems are entering the wrong color on one or more stickers, using the wrong face order, or ending up with too many or too few stickers of one color.
A standard 3×3 cube should have:
- 9 white stickers
- 9 yellow stickers
- 9 red stickers
- 9 orange stickers
- 9 blue stickers
- 9 green stickers
If one color appears too many times and another does not appear enough, the cube entry is not correct. In some cases, the sticker pattern may also describe a cube state that is not physically possible on a real Rubik’s Cube.
What the Rubik’s Cube Move Letters Mean
After you enter your colors, the solver will return a series of moves. These letters tell you which side of the cube to turn.
U means turn the top face.
D means turn the bottom face.
L means turn the left face.
R means turn the right face.
F means turn the front face.
B means turn the back face.
If a move has an apostrophe, such as R’, that means turn that face counterclockwise. If a move has a 2, such as F2, that means turn that face twice.
Learning this notation makes it much easier to follow the solution and understand how the cube is being solved.
Is This Rubik’s Cube Solver Good for Beginners?
Yes. This tool is beginner-friendly because it does not require you to memorize a full solving method before getting help. If you are new to cubing, entering the colors and following the moves can be an easy way to finish a scrambled cube and start learning how different turns affect the puzzle.
It can also help people who partially solved a cube, got stuck, and want a way to recover without taking the whole cube apart or peeling stickers off.
Can This Solve Any 3×3 Rubik’s Cube?
This solver is designed for standard 3×3 Rubik’s Cube color layouts. As long as the cube state is entered correctly and the pattern is valid, it can generate a solution.
It is not meant for larger cubes like 4×4 or 5×5 puzzles, and it is also not intended for shape mods or cubes with unusual color arrangements unless they still follow the standard 3×3 structure.
Tips for Entering Your Cube Faster
The fastest way to use a Rubik’s Cube solver by color is to work carefully and consistently. Start with the top face, then move through the rest of the faces in order. Keep the cube in the same orientation the whole time. Before you click solve, quickly check that each color appears exactly 9 times.
Spending an extra few seconds checking your entry can save you from getting an invalid cube error and having to start over.
Rubik’s Cube Solver FAQ
How do I solve a Rubik’s Cube by entering colors?
You solve it by matching the stickers on your real cube to the stickers in the online tool. After all six sides are entered correctly, the solver generates the moves needed to solve the cube.
Why does my Rubik’s Cube solver say impossible state?
This usually means one or more colors were entered incorrectly, the face order was wrong, or the sticker pattern does not match a real solvable 3×3 cube.
What order should I enter the Rubik’s Cube sides?
Enter the faces in this order: Up, Right, Front, Down, Left, Back.
Do I need exactly 9 stickers of each color?
Yes. A normal 3×3 Rubik’s Cube has exactly 9 stickers of each color.
Can I use this Rubik’s Cube solver on mobile?
Yes, as long as the page and tool are responsive on your WordPress site, users can enter colors and get a solution on mobile devices.
Final Thoughts
A Rubik’s Cube solver by color is one of the easiest ways to fix a scrambled 3×3 cube when you are stuck. Instead of trying random turns and making the puzzle worse, you can enter the colors, get the correct move sequence, and solve the cube with more confidence.
Whether you are a beginner or just want a fast answer, this type of tool makes solving a mixed-up Rubik’s Cube much easier.